Limited Edition of 100 |  43mm  |  Vintage NOS Valjoux 7734 movement

Pinion is pleased to announce its first chronograph wristwatch. A contemporary re-imagining of the possibilities for the iconic Valjoux 7734 handwound movement, the Pinion Revival 1969 (R1969) allows the wearer to see time on both sides of the watch.

On the front, present time. Hours, minutes, seconds and date display – along with classic chronograph stopwatch registers – appear against a multi-layer, contrast finished black dial with milled, polished and applied indexes and numerals.

On the reverse of the watch and visible in full through the grey smoked glass exhibition caseback, we see time as it was measured in the past, in the form of a beautiful NOS Valjoux 7734 hand-wound movement from 1969.

Born in Switzerland.
Raised in England

Revered for its ruggedness and reliability the handwound Valjoux 7734 movement was (and still is) one of the most dependable watch engines of its era. The movements used in the Pinion R1969 production were all made in 1969 but never assembled or put into a watch. That is, until now.

Pricing and availability

The Pinion Revival 1969 is made in a limited edition of 100 pieces and is available to order now.

If you are interested in this watch, please call us on +44 (0) 3333010130 or email us at: to chat about the finer details of the design and to enquire about the remaining serial numbers available

Price: £4,950.00

Price £4,125.00 for Non EU Customers.

handwound chronograph - Revival 1969 by Pinion


Watch features

• Mechanical chronograph movement
• Time in hours, minutes
• Small non hacking seconds
• Date display
• Stopwatch function: Minutes, Seconds
• Push in crown
• Exhibition case back, tinted sapphire crystal


• Valjoux 7734 (1969 New Old Stock), Glycodur balance
• Frequency: 18,000 A/h
• Jewels: 17
• Power reserve: 45 hours
• Winding: Handwound


• Case: 316L Stainless steel, Polished finish
• Glass: Sapphire, convex with anti-reflective coating on inside
• Water resistance: 10AT (100 Metres)
• Shock resistance: INCABLOC
• Diameter: 43mm
• Case height: 16mm

About the Revival 1969

Piers Berry, Founder of Pinion watches, takes up the story. 

“How do you bring something from 1969 up to date without changing anything? That was the challenge we set ourselves. We’re a modern English watch company that’s secured a very rare stock of these 7734 movements still in their unused and unassembled (Ebauché) condition. So we started with what we had and built out from there.

With the dependability of this movement comes the practicality to wear this watch every day. So for the case we chose 316L stainless steel. It’s hard, strong, highly resistant to corrosion and has excellent hypoallergenic properties. As an added bonus it also polishes up to a stunning reflective finish.

A handwound chronograph invites and requires a high degree of human interaction. So the ‘contact points’ become important from an ergonomic and operational point of view. That’s why we paid special attention to designing and making our own bespoke pushers and crown to provide a positive action and wearer feedback.

Of course, in a chronograph watch the dial needs to be clear and simple to read. At Pinion we strive for simplicity and subtlety over complication and confusion; We engineered our own bespoke applied typeface for the main makers and so even though the dial is all black there are multiple levels and variations in the finish on its different sections to create contrasts that help with legibility and we’ve engineered this to a 100th of a millimetre of precision to ensure it’s accurate.

In terms of the aesthetics we wanted the Revival 1969 to reference 20th century vintage chronographs, but with a 21st century twist. Hence the ‘Superdome’ double bezel and convex anti-reflective crystal combination and a very wearable, modern yet modest 43mm size.

For all these reasons the Revival’s form follows its function, and that for me is what makes this a thoroughly modern watch – with heritage at its heart. You can see its modernity and ‘feel’ its history… the ticka-ticka sound from the handwound Valjoux movement is wonderfully satisfying and just a bit different from higher beat modern automatic movements”.

[ Pictured: Top: Assembling the 7734 from NOS ebauché components. Bottom: Fully assembled Valjoux 7734 movement ]

Text and images ©2014 Pinion Watch Company

Assembling the Valjoux 7734
Valjoux NOS 7734 movement

Presentation box

Pinion Revival 1969 presentation box

The R1969 will be presented in a large handcrafted solid wooden box

Leather strap

The Pinion R1969 comes with a fine leather calf strap which is handmade in the UK by our strapmaker

Two year warranty

The R1969 is guaranteed against manufacturing + workmanship defects for two years.

1 Comment

Comments are closed.